200 PRESSURE SWITCH
Thread: 1/8 inch
Turn On Air Compressor 165 PSI ; Turn Off Air Compressor 200 PSI
Fitment: Fits 12V or 24V Applications Ideal For Air Horns,Train Horns,Air Suspension Compressors,ect.
High Accuracy ; Tank Mount Type
Stage 2 plus Relay 12V 100A
- Stage 2plus 100amp Relay
- Transfers Maximum Current
- Maintains Longer Battery Life
- High Current Transfer
- 12V Application
- Easy Installation
ANALOG DUAL NEEDLE GAUGE
This dual needle gauge from Airtekk is one of the best analog gauges out there. The illumination shines through the face instead of around it like all of the other options on the market. Plus, it looks right at home in most interiors with its white clean bezel and face.
Features:
- White Illumination
- Re-scaled for a more useable pressure range (0PSI - 200PSI)
- Clean design
- Male 1/8" NPT connections
- 2" diameter
Airtekk Water Trap
Water traps are used to help prevent condensation from building up in your valves or manifold. Water traps are a must for those that daily drive in below freezing temperatures.
60 FEET AIRLINE HOSE
This air line is DOT Approved and is sold as a 60 foot roll.
These 60ft bundles of air line are limited to 1/4" and 3/8" sizes.
AIRLIFT 5 GALLON POLISH TANK
Up for grabs is a 5 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.
AIRLIFT 2.5 GALLON POLISH TANK
Up for grabs is a 2.5 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.
AIRLIFT 4 GALLON POLISH TANK
Up for grabs is a 4 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.
Airtekk Stage 2 Digi Gauge
Up for grabs is a dual digital digi gauge.
comes with two sensors that you can easily screw on to any manifold or
on a tee and on to your stage 1 kit.a
DUAL VIAIR 380C COMPRESORS
Viair's 380C compressor dual pack is a great choice if you're looking for a pair of reliable compressors that are quieter than other options on the market. If you want even quicker fills time or you're building a symmetrical management layout, this dual pack is for you. Rated at 200 PSI, these compressors will work well for most setups and share the same footprint as the Viair 400C compressors.
1/4" stainless steel braided leader lineInline check valvePermanent magnetic motorRubber isolated mounting feetIngress protection rating: IP67
DUAL VIAIR 400C COMPRESORS
The Viair 400C is the standard compressor If you want even quicker fill times or you're building a symmetrical management layout, this dual pack is for you. Although the 400Cs are louder than other compressors like the 380C and the 444C, they're quicker and put out a combined 4.55 CFM at 0 PSI with a 33% duty cycle at 100 PSI. When it comes to 150 PSI applications, the Viair 400Cs are the best bang for your buck.
1/4" stainless steel braided leader lineInline check valvePermanent magnetic motorRubber isolated mounting feetIngress protection rating: IP67
DUAL VIAIR 444C COMPRESORS
If you're looking for a pair of compressors that are closer in speed to the 400Cs but quieter like the 380Cs, Viair's 444C dual pack is what you want. These compressors have a larger footprint than the 400Cs but they use less power and are built to handle 200 PSI applications. The Viair 444C dual pack is a common upgrade from the standard compressor if you want quicker fill times or you're building a symmetrical management layout.
1/4" stainless steel braided leader lineInline check valvePermanent magnetic motorRubber isolated mounting feetIngress protection rating: IP67
STAGE 1 MANAGEMENT ONLY
Up for grabs is a complete stage 1 management kit with no airsuspension.
Comes with the following
5 gallon polish tank
Air lines n fittings
Single compressors VIAIR 444C
Two manual switches
Dual needle gauge x 1 *
*** or upgrade your needle gauge over to our stage 2 single digi gauge for $110.00 select this on the drop down menu***
click here to see the digi gauge
Want to add a second compressor? you can for an additional $140.00. Having an additional compressor will allow the fill time on the tank be faster. Please select from the drop down.
Power Supply x 1
200 pressure switch
80amp relay x 1
5 TEE FITTINGS
Airtekk Stage 2 Plus Pro system
Up for grabs is a Stage2 Plus management only with no struts.
1/4 Air line n fittings
Airtekk 2Plus system kit with water trap
Power wire supply x 1
AIRTEKK STAGE 2 MANAGEMENT ONLY
Up for grabs is a Stage 2 management only with no struts.
5 gallon Polish Tank
Air line n fittings
Dual compressors Viair 444c
Dual needle gauge x 2
9 electric Switches remote
Air valves
Power wire supply x 1
80amp relay x 1
Teflon tape X 1
AIRTEKK STAGE 2 PLUS MANAGEMENT ONLY
Up for grabs is a Stage 2 PLUS management only with no struts.
5 gallon Polish Tank
1/4 Air line n fittings
Dual compressors Viair 444c
AIRTEKK STAGE 2 PLUS kit with water trap
Power wire supply x 1
80amp relay x 1
Stage 4 Magic Air System only
Management ( MagicAir ) ONLY
Magic Air Controller with 3 memory presets
Magic Air level sensor kit
Magic Air V8 manifold
The MagicAir V8 Valve unit is the core control unit of the system.It integrates the main control ECU and 8 solenoid valves,double intake, front and rear independent exhaust. The control unit with all-metal appearance, it provides the cleanest installation and most reliable operation on the market.
Magic Air Phone App for any smart watch
---------INSTRUCTIONS----------
AIRLIFT 3P ONLY
Up for grabs is a Stage 3 management only with no struts.
1/4 Air line n fittings
Airlift 3p kit with water trap
Power wire supply x 1
Teflon tape X 1
AIRTEKK STAGE 4 MAGIC AIR MANAGEMENT ONLY
Up for grabs is a Stage 4 Magic Air management only with no struts.
Stage 4 ***INTRODUCTORY PRICE****
Management ( MagicAir )
Dual 444c compressor
5 gallon polish tank
Air lines n fittings
Magic Air Controller with 3 memory presets
Magic Air level sensor kit
Magic Air V8 manifold
The MagicAir V8 Valve unit is the core control unit of the system.It integrates the main control ECU and 8 solenoid valves,double intake, front and rear independent exhaust. The control unit with all-metal appearance, it provides the cleanest installation and most reliable operation on the market.
Magic Air Phone App download and phone app for Iphone watch
Power wire supply
80 amp relay
AIRTEKK STAGE 3 MANAGEMENT ONLY
Up for grabs is a Stage 3 management only with no struts.
5 gallon Polish Tank
1/4 Air line n fittings
Dual compressors Viair 444c
Airlift 3p kit with water trap
Power wire supply x 1
80amp relay x 1
Teflon tape X 1