This swivel elbow is perfect for connecting your air line to your bags and tank. This is the swivel elbow that comes standard in our full kits and management packages as it's one of the most reliable fittings out there. This swivel elbow features a metal sleeve which helps align the air line inside of the fitting, providing an improved seal.
*1/8 thread to 1/4 push to connect

This swivel elbow is perfect for connecting your air line to your bags and tank. This is the swivel elbow that comes standard in our full kits and management packages as it's one of the most reliable fittings out there. This swivel elbow features a metal sleeve which helps align the air line inside of the fitting, providing an improved seal.
*1/8 thread to 3/8 push to connect

The male straight is generally used to connect standard air line to bags and tanks when a 90º elbow is not necessary. It's DOT approved and features a metal sleeve which helps align the air line inside of the fitting, providing an improved seal.
*1/4 thread to 1/4 PTC Push To Connect

Tee is great for running air line to multiple places. The 1/4" version can be used to run 1/4" air line to analog gauges. These union tees are DOT approved and feature a metal sleeve which helps align the air line inside of the fitting, providing an improved seal.

This fitting will allow you to relocate your Viair Compressor braided Line to a far location of your tank and affix a 1/4 airline hose.

• [ Widely Used ] This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
• [ Product Material ] 304 stainless steel strength and resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
• [ Working Temperature ] Temperature range from -40 to 392 degrees F.
• [ Maximum Pressure ] Maximum working pressure is 1400PSI.
• [ Function ] Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal.

80 Amp Heavy Duty High Current Power Performance Dual Battery Isolator Relay
- Prevents Primary Battery Discharge

- Stage 2plus 100amp Relay

Here we have a manifold check valve that would go in place if the inlet feed of your manifold. Ideal should you compressors or tank get damaged, the manifold will hold air and prevent the air bags to leak.

This dual needle gauge from Airtekk is one of the best analog gauges out there. The illumination shines through the face instead of around it like all of the other options on the market. Plus, it looks right at home in most interiors with its white clean bezel and face.

Features:

• White Illumination
• Re-scaled for a more useable pressure range (0PSI - 200PSI)
• Clean design
• Male 1/8" NPT connections
• 2" diameter

Water traps are used to help prevent condensation from building up in your valves or manifold. Water traps are a must for those that daily drive in below freezing temperatures.

UP FOR GRABS IS A SET OF AIRTEKK SPANNER WRENCHES

up for grabs is a replacement Airtekk Antenna for the Stage 2 plus system

This air line is DOT Approved and is sold as a 60 foot roll.

These 60ft bundles of air line are limited to 1/4" and 3/8" sizes.

sold as a 2 pack

UP FOR GRABS IS A SET OF AIRTEKK DAMPER KEYS, COMES WITH 4 LIKE IN PICTURES

If you live in norther or cold weather areas and you are tired of your compressors freezing. We have the solution for you folks. Check out our heated water traps.
Will also need the solid brass pipe union fitting ------- click here -------

Up for grabs is a 5 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.

Up for grabs is a 2.5 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.

Up for grabs is a 4 Gallon Polish tank by Airlift with a 4 face port and single drain port on bottom of tank. High quality aluminum tank that can with hold 200 psi of tank pressure.

Up for grabs is a dual digital digi gauge.
comes with two sensors that you can easily screw on to any manifold or
on a tee and on to your stage 1 kit.a

up for grabs is a replacement Airtekk AIRTEKK STAGE 2 PLUS HARNESSS

AIRLIFT SECONDARY HARNESS